You are reading a single comment by @ChasnotRobert and its replies.
Click here to read the full conversation.
-
Ah; thanks.
I did suddenly find myself wondering what the lower limit was. The cassette has 32 at the big end so 38/32 could be adequate.
But 38/50... Not a big enough gap for an xt front mech?
Or get a triple.
Or live with the flexy Stronglight crank.
I'd better go check some gear inch calcs.
ChasnotRobert-
Or live with the flexy Stronglight crank.
7410 is going to be just as bendy as anything Stronglight have made recently. If you really need a stiffer crank (you don't, but whatevs), get a 5750 or some other HT2 crank.
gbj_tester
The most obvious one is that the smallest inner ring you can use with those cranks is 38T