You are reading a single comment by @Abn1075 and its replies.
Click here to read the full conversation.
-
Thank you. Since I had several carbon and alloy covers laying around. I decided to try and modify a couple... the result is actually pretty good ;-) So for the time being I will try to use one of those. One is about 2,5mm of stack and in carbon and the other in alloy is 1mm of stack.
When do you expect maybe to have the topcap in black? It is no problem to make payment in £ :-) it only cost about £2 for the transfer. So no problem. But I will let you know if I need one of your covers in the future.
Regards
Allan
Abn1075-
When do you expect maybe to have the topcap in black?
Next time I have a batch of anodising to do. I don't know when that will be, but probably not soon. There's a top caps thread which drives the schedule for those parts
gbj_tester
I can send to Denmark as long as you can send sterling payments to a UK bank. Plenty of 47mm covers in either 2mm or 3mm deep. At the moment, I only have top caps in raw silver.