-
Mine arrived. Thank you. First impression. The finish could be better. Bit of glue etc.
Actually have an E-werk. What would you like?
fussballclub-
Ah that'll be the black epoxy at the ends? I wanted to wait another day but Marcus needed one for the weekend. The epoxy is taking about 5 days to dry, it's a very slow potting type, and I've had problems with it running through and falling out the bottom!
I'm switching to silicone instead. That was the original plan but it proved too thick for the limited size and I couldn't inject it (tried everything, even football pump needles!). I've since had some injectors milled out of brass and it's now working.
edit: I can see the epoxy at the end of Marcus's, drat. If you don't mind perfecting it, a little fine grid sandpaper will take it off (and the titanium is raw so no problem there).
acharnley
They are rather small - the PCB's have through hole soldering shaved to fit the case and epoxy injected with a syringe and needle!
Expected RRP is £92 (this will be through distributors).
Still after an E-werk for efficiency comparison (done The Plug 3 and D1 comfortably beats it).
One review unit left @ £50, fire me a PM if you want your name on it.
Regards, Andrew