You are reading a single comment by @mespilus and its replies. Click here to read the full conversation.
  • In the end I put some silicon sealant into and ontop of the crack in the end as some protection until I pick up the bits I need.

    ... Next question

    I’m fixing a pair of Ikea Mulig clothes rails and a floating shelf into a brick wall:

     

    http://i.ebayimg.com/00/s/NzY4WDEwMjQ=/z/Hz0AAOSwQupXXToO/$_57.JPG

    The shelf shouldn’t have too much – mainly nice shoes (so maybe 5kg), but I’m conscious that clothes on rails add up.

     

    2 questions really:

     

    1.       Any suggestions on what screws to use? I have a load of c.80-100mm screws – fairly thin, but obviously longish. The rails have 2x2 fixing holes and the floating shelf has 2x4

    2.       The rawl plugs I have are a bit short for the 80mmish screws. Could I get away with just snipping them in half and using 1 and ½ in the hole?

     

    Cheers.

     

    I’ll post some pics when we’re done, but just as an FYI to outline our overall storage strategy as it was discussed a while back:

     

    ·         x1 nice wardrobe,

    ·         x1 small chest of draws,

    ·         these open rails with a shelf for shirts, dresses, etc.

    ·         boxes for jumpers, etc.

    ·         big basket for girls hair stuff,

    ·         and maybe an old trunk depending on space.

     

    The other clever storages solutions just ended up being too pricey and inflexible, whereas wardrobes can be had from 2nd hand shops for +£30 (well more like +£50 once delivered).

  • Sorry to be a party pooper
    but
    'silicone sealant' has poor unprimed adhesion onto tiles,
    and,
    typically can only cope with movement of 1/4 or 1/8 of the gap/crack size filled.
    Realise you had to do 'something', but expect water to getting underneath the broken tile.

  • Totally understand that and will be replacing asap. But for the next day or two, I figured that plus a bath mat ontop and careful showerring should give some protection.

    Unfortunately the tile isn't full size so I need to get hold of a cutting instrument as well as grout and adhesive. I don't think my dremel will be up to the task ;)

    I'm just doing some reading to decide whether to borrow or invest in a 10" or 6" angle grinder (edit or a 4-4½").

About

Avatar for mespilus @mespilus started