Mash / Cinelli Vigorelli

my mash hhsfixedrb

cant wait to mount some monster 45mm knobbies and a riser as soon as the winter arrives :-)

103mm spindle for 75s?
They are supposed to use 109mm spindle.
And then the ISO/JIS thing, 75s are ISO and rd2 are JIS

wait, it fits 45s? Photos of this please.

that would be amazing.

yea theres quite a lot of clearance

Hmmm, 1993 should take note of that, my chainline seems okay though, if its off i can't tell.

I think the older ones are JIS? Or none NJS ones are, i've got some 75's on a JIS and its fine

ISO cranks work on JIS axles, but not the best thing, as it could ruin the square taper on the crank. I ran 75s on a shimano axle, 118 I think, without any issue.
JIS cranks must not be assembled on ISO axles, cause they don't let you tighten properly the crank bolt and will ruin the taper and maybe cause accidents.
As far as I know 75s have always been ISO.
What sounds strange to me is running 75s on 103mm axle

I think it is sheldon who says that ISO crank on a JIS spindle stands 4mm further out than the sae lenght ISO spindle. Therefore 107mm JIS bb puts the chainring of an ISO chainset in the same position as 111mm ISO bb.

yep
http://www.sheldonbrown.com/bbtaper.html

ive run just basic 107mm shimano bb on 75's without issues. that kind of ruins the resale value though. dont go switching back and forth as you might ruin the cranks.

I've got 40c on mine and there is loads of room.

Looks ace, I've just picked one up on eBay, what's that saddle ?

strippped smp hell. Thats back in the parts bin now as I couldnt find the right setup for it. Got smp composit on that bike now.

According to tester there's no significant difference between JIS and ISO tapers, if I recall correctly

the angle of the taper is the same, the length of the tapered part varies even between different brand of the same taper (atleast truvativ and shimano jis had different length of tapered part). Just make sure it doesn't stick out too much or bottom out and you'll be fine.

the angle of the taper is the same, the length of the tapered part varies even between different brand of the same taper.

This.

Nothing to worry about.

Looking a Cinelli Mash in original grey colour way. Size large/55cm. Check the wanted section please. Cheers. Tom

Currently building a fixed/disc Condor for winter.
When my front rim gets worn out on my Vig, tempted to slap a disc fork on.
Anyone else done this? Need to find something with a similar rake.

Anyone got a tester SDS topcap on a Parallax? I wanna get one sorted but I can't really do any measuring or what have you atm.

Is Bolt? Ah see histo. Noice.

massive enve logo, no enve parts

Stem cap is enve

wooooooooooooooooooooooooooooow

i'm in the market for some omnomnoms. what's the max crank longth you can get away with on a smash? presumably 165mm / 48t will come up clear

smells like 170 for big lean clipless crits

ah cheers - too late, ive had a few office-scoops so bought the fuckers anyway

https://www.raceviewcycles.com/sram-omnium-track-chainset-mirror-black-165mm-48t-inc-gxp-cups?language=en&currency=GBP

good price too

Anyone use the MASH bullhorns? Any good? What others are worth considering?