Audax rides

So then lift those hands from the keyboard, and dial their number!

• Sealed sewing
  
• Bright Inner fabric to see things easier
  
• Double zipper, to be able to open from both ends
  
• One (or better... two) inner velcro separators to make it tight for leg clearance
  
• Tricky velcro strap is located at the diagonal tube, between headtube and gear/brake cable ports, it should be 2cm wide as shown in my cardboard template bellow, you can see what I'm talking about in the second picture. Other important velcro straps are on both ends of zipper to give it a bit of tension so its easy to zip and unzip it.
  
  
  
  
• Covered cable entry on one side (mine was on left side, near headtube at the bottom, to feed a usb cable from the dinamo into the D1 outside, and then go inside to the power-bank in a sealed bag resting inside the framebag.
  
• Inner zipper pockets?
  
• Reflective stripes?
  
• UK Aussie flag?
  
  

Its also important to know wich headset feed bag that you are going to use, so the velcro straps of both framebag and feedbag doesn't interfere with their positions.. Either mail it to them so they can make sure that it works, or give it the exact measures...Or they just can make that too for you

After the reservation, create that cardboard template, and email it to them with everything you told them written on it and velcro strap positions and widths.