Gudereit - 1st Generation Dura-Ace Black Edition *** Colnago Active B*Stay - Dura-Ace 7800 10 Speed Columbus Altus 2

Greetings,

I have two wicked bikes to put up for sale! :)

The first is a genuine barn find that looks to be original from the handlebar tape down to the tubs (which still hold air!), on an amazing and rare 1st Generation Dura-Ace Black Edition groupset including super rare Dura-Ace high flange Black Edition hubs.

I've given the bike a good look over, the seapost moves free as does the stem, cranks turn with no noise or play. Hubs turn smooth without any play, there is no damage, dings or dents on the frame, the bike rolls straight and true.

A really cool example of a early-mid 70's top end road bike, untouched & unmolested in any way.

Seat-Tube: 60cm C-T *** Top Tube 58.5cm C-C

Crankset: Dura-Ace Black Edition
Front & Rear Mech's: Dura-Ace Black Edition
Brakes: Dura-Ace Black Edition
Brake Levers: 1st Generation Dura-Ace
Hubs: Dura-Ace 1st Generation Black Edition High Flange
Rims: Super Champion Competition
Handlebars: SR World Champion Black Edition
Seatpost: SR Custom
Stem: SR
Bottom Bracket: Dura-Ace
Headset: Dura-Ace Black Edition

More pictures: https://www.dropbox.com/sh/nnd2o156rukwrk6/AAAULErY44iP5sPcmJ8OAJmPa?dl=0

Price: €680 + Shipping or pick up in Warsaw

The next bike is a close-to-mint condition Colnago Active on Columbus Altus 2 tubing and on a full Dura-Ace 7800 10 speed Groupset (minus the crankset which is 7700). These early 2000's Colnagos are usually really used up as they are great bikes and had been ridden and used hard by their owners. So in general it's pretty difficult to find one in this condition, still has a very shiny and unscratched clearcoat and apart from a few small paint chips the frameset is almost like new, presents itself like a 1 year old bike.

There is no damage to speak of, the groupset is in excellent condition, there are no dings or dents on the frame, the carbon seatstays are in extremely good visual shape and 100% solid with no damage, not even a clear coat chip. I'd say the only thing that the bike needs is a tune up for spring, new cables & guides as I don't know the age of the ones currently installed. If you're interested in the bike I can do a full tune up for just the cost of parts included with the sale.

Seat Tube 56.5cm C-T *** Top Tube 55.5cm C-C

Sti Shifters: Dura-Ace 7800
Front & Rear Mechs: Dura-Ace 7800
Front & Rear Brakes: Dura-Ace 7800
Crankset: Dura-Ace 7700 52/38 172.5
Bottom Bracket: Dura-Ace ISIS BB7700
Seatpost: Selcof BZ-8 White Carbon 27.2mm
Seatpost Clamp: Miche X Carbon
Wheelset: Easton Vista SL
Stem: Bontrager
Handlebars: Bontrager

More pictures: https://www.dropbox.com/sh/36mjd676h2zx68c/AADH_PBGtb7dM6L0GnckXT9Pa?dl=0

Price: €915 + Shipping or pick up in Warsaw

4 Attachments

Forgot to add that one of the hub bearings on the Colnago had a bit of play, so I've replaced both the front and rear bearings while I was at it. All new sealed bearings with the Easton wheelset...

Price drop: Colnago €900

Price drop on the Gudereit to €660

Sale Pending on the Gudereit

Gudereit is amazing, great find, and GLWS.

Thanks :) Sale did not go through but I'm restoring her now so not for sale at the moment. Might post it after the resto.

So only the Colnago for sale. A little price drop again. 880 euros.

Price drop on the Colnago, 870 euros

860? Am I pricing this too high?

I need only the dura ace 7800