You are reading a single comment by @hamrack and its replies.
Click here to read the full conversation.
-
If you don't need a high torque and won't use it often then get an adapter, it'll be useful to have. The adapter won't move you further out as you're going from smaller to larger drive.
hamrack
hugo7
I need a 24mm socket. I bought this Halfords Professional Socket 24mm 1/2" Drive from Halfrauds without checking my torque wrench first.
My torque wrench is this one
Which means it’s a 3/8"sq Drive, right?
What is the best thing to do?
a) Take it back and buy a 3/8” 24mm socket, or
b) Buy a ½” – 3/8” adaptor?
I'd assume that adaptors aren't great as you're moving the leverage point outwards? Or does it not matter?
I am guessing I could pop the adaptor bit in my drill (which has a torque setting) and use that, which would be more stable.
Also any recommendations on good value sockets? One of the bolts it’s for is plastic, so I want a good fit.
Cheers.