You are reading a single comment by @drøn and its replies.
Click here to read the full conversation.
-
Fit two nuts on the other side, loosely, and then tighten them against each other so they operate as jam nuts. Then, with a spanner holding the inner jam nut in place, undo the lock nut you're trying to shift. Once it's off, loosen the two jam nuts and unthread them.
-
I can't get a good grip on the axle
Soft jaws, e.g. https://www.bike24.com/p247998.html
Brommers
gbj_tester
@drøn
How do I remove the last lock nut from the threaded track hub axle?
I can't get a good grip on the axle, they should have made some wrench flats on it.
I tried tightening up two other lock nuts against each other to hold, but it didn't work.