Wheelbuilding / Wheel Building / Wheel build help

Maybe they're ok with hand-built stuff but have you ever tried to true Ksyriums?

Does anyone have stock of 32 hole 26" Ryde Trace Enduro/Trace 29s? I'm looking for one for a wheel rebuild.

.5 is no biggy?

I have an older Corima four spoke which has suffered hub debonding. COrima have offered to look at it, but I found this on eBay and wondered if I could just swap the hub from the old to the new?

http://www.ebay.co.uk/itm/like/CORIMA-HR-HIGH-RESISTANCE-CARBON-WHEEL-TRACK-FOUR-SPOKE-no-tyres/322110413943?hlpht=true&ops=true&viphx=1&_trksid=p2050601.c100103.m2451&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20150422114059%26meid%3D97b8e9bf4beb4e2da34d48039e83d183%26pid%3D100103%26rk%3D1%26rkt%3D4%26sd%3D322110413943%26clkid%3D5449263842778236532&_qi=RTM2065547

Nope. That's 0.25mm difference on each spoke.
Some spokes vary by as much a milimetre even when they come from the same box.
Plus they stretch with use so it's actually better the rim is a teenie bit shallower

I'm seeing the XR31T @ 580 ERD?

http://fairwheelbikes.com/kinlin-xr-31t-clincher-rim/

Been debating having a crack at building a couple of wheels for myself for some time now, really like the idea of using h-son tb14's purely for aesthetic reasons of the low profile box rim and 23mm is where i think i want to be on tires (def clinchers too), looking for some advice/recomondations inregard to hubs, had a few flip-flops but only ever used the fixed side but think i might go for fixed-fixed as i'm keen to start doing a bit more distance and think i might be better to have the range? Really like the look of high-flanges, so looking for a couple of mid-range (not breaking the bank, somewhere around 150euros for the pair) options....?

Novatec

Next...

Just measured the few I have in the workshop. Pretty consistent 578mm.

20 spokes shallow (24mm) carbon rear wheel - going to be at all useable?

Anyone know where to get hold of American Classic 420 Aero 3 rims? Client wants his worn rims replaced but not sure if it's possible to get hold of just the rims. All my searching has resulted in whole wheels.

American Classic 420 Aero rim

Dodgy page: -> http://www.topfun.com/en/rims/2535-american-classic-420-aero-3-700c-rim-18-holes.html

Ordered a pair of hubs from Mack so looking for a good rim for training and cross, is the R460 a good choice? What else should I be looking at in terms of rims?

Exactly what I have .. great rims

Hello. First build so advice warmly welcomed.
Which hub to get?
Need to swap the rear hub on my Raleigh Record Sprint.
The 5-speed Maillard Helicomatic that it shipped with has died.
Planning to reuse the rim and spokes, because I womble like that.
(is that a bad idea?)

Specs:
Black
36-hole
45mm flange diameter
60mm width from flange to flange
120mm OLD

(All these measurements are approximate, I don't have a calliper.)
From initial conversations I think that I'm going to need a track hub or an old 5-speed... would be fun to try riding fixed. would be good to get sealed bearing too... but yeah, new to this so advice welcome...
Thank you. B

Novatec low-flange (a266sbt) track hub comes close enough.
http://novatecusa.net/project/a266sbt/
http://www.ebay.co.uk/sch/i.html?_odkw=novatec+low+flange&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xnovatec+a266sbt.TRS0&_nkw=novatec+a266sbt&_sacat=0

Thanks Lukas - appreciate your help.
Ben

I've ridden RS80-C24 off road - 20 spoke 24mm rear.

R460s are great, but the Kinlin XR22T is also worth a look. Very similar rim, but 10 grams lighter, and you can get them in offset for the rear wheel.

Kinlin xr22 - lighter, wider, stiffer and offset.and very round and well finished. Little bit pricier then 460.

The kinlin is a better rim.

I know :-)

are they twice as good? because they're twice as expensive

edit: also does it really make sense to use asymmetrical rims for a fixed/fixed hub

Dt Swiss 460 is 35 odd
Kinlin xr22 is about 40 odd

Ocr rim on a symmetrical hub is a no

Have you tried Kinlin tl-23?-> http://www.bikehubstore.com/product-p/tl23.htm

Is it good? I like the look of the rounded shape

Superstar Tactic AM Rim is the same rim -> http://www.superstarcomponents.com/en/superstar-tactic-am-rim.htm