You are reading a single comment by @Sparky and its replies.
Click here to read the full conversation.
-
Can you put it in a vice instead? That works well for BB cups that only have a small area to purchase.
-
£8 for one made by their framebuilder...
http://shop.18bikes.co.uk/m12b0s406p2340/EIGHTEEN-1-2-inch-Drive-socket-%28faced%29-2015
They've just faced them, don't see why you couldn't do the same if you had access to the tools.
-
Would the side of the jaws of a 26mm or adjustable spanner not be sharp enough to grip?
hamrack
atk
stevo_com
@Sparky
I need a 26mm socket with a completely flat face to rebuild my mountain bike forks, but the one made for the job is £20 (ouch) and out of stock:
http://www.jejamescycles.co.uk/fox-forx-beta-flat-socket-id82128.html
Reckon a grinding wheel or similar would make the edge of a normal (cheap, available) 26mm socket flat?
The nut it needs to take off only has a few mm to grab, and a normal socket has a chamfer that reduces that to just a mm or so - and you apparently just end of rounding it off.