You are reading a single comment by @Ball-stain-McGhee and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Ball-stain-McGhee
Clearing out the shed and need to get rid of these tow frames (and forks).
One is a 59cm Raleigh of some description, it had an elan sticker on it but I'm not sure if that's what it is. I have given in a coat of zinc primer and a fairly careful going over with the rattle can.
The non drive side cup is a bit on the stiff side and as I don't have a table top vice I haven't put much effort into removing it. The seat post is also fairly stiff but it's not seized. With a bit of effort it'll come out.
Not sure about the rear spacing, but it has no derailleur hanger, came with 27 1/4 inch wheels and the bottom bracket was tange so doesn't appear to be the troublesome Raleigh threading.
The other frame is a BSA mixte frame. The seat tube is about 55cm.
Bottom bracket cups are moving and included. They are Raleigh threaded so could be work with a spindle of your desired length.
It also came with 27 1/4 wheels.
Both frames are located in Hereford and if you can't pick them up all I would like in return is payment for packaging and posting of £10 per frame.
3 Attachments