You are reading a single comment by @mrJL and its replies. Click here to read the full conversation.
  • I've used a 108mm bb, but also have a 113mm one. Is that my best bet to get a decent chainline with the chainring mounted on the inner side of the cranks (which was rubbing ever so slightly on the chainstay with a chainline of 41mm)?

    Am I correct in assuming that it would be 2.5mm further out from the chainstay with a chainline around 43.5mm?

    Or is 51mm (as it is now) fine for a 1x10 setup on what is essentially an MTB setup? According to Sheldon 52mm is fine for that.

  • I'm running a 113bb, 51mm(ish) chainline and 1x10 XT/SLX mix on my Troll, works fine and the chain angle isn't too bad at either end of the cassette.

About

Avatar for mrJL @mrJL started