-
They're built onto the 729's and are well rideable so I'm not really keen to cut the hubs out. The front is tied and soldered in fact. I also want to get rid of everything in one hit to get it out my hair.
They've been well maintained but well ridden, for a time. Not touched them for years but remember 2 of the rotor bolt holes have stripped threads on the rear. The rear has 135mm 10mm bolt-in axle in and front 20mm thru.
-
i heard the spirit of the forum calling so i came
as i got a very decent bargain on the above i am passing on some of the bits via freecycle and have added some of my own
Pair of well beaten Mavic EX729 rims bashed about and dinged but mechanically sound. These are great rims, Mavic's reference downhill rim 32H
Pinnacle Camino frame with Race Face Ride XC cranks attached. As can be seen from the photos previous owner has removed lowered the seattube to run a low saddle. Can't vouch for the work done but it looks mechanically sound. Pics show the work
Assorted tyres
Impac 27 x 1.25 good / new
Camel 26 x 2.1 average condition
Specialised FatBoy 26 x 1.25 slick tyre has been well used but has life left
2 x Impac Speed Power 3 26 x 1.75
Schwalbe Marathon Plus 26 x 1.75 skiided through blue layer under the tyre is showing , still usable and puncture proof
Eskar 2 Control 26 x 2.3 MTB
DMR Moto 26 x 2.2 tyre has been flattened off but still very usable
~~Michellin Dynmaic 700 x 23 good condition ~~
Chen Shin MTB 26 x 1.95
Kenda MTB 26 x 2.1 Good condition
~~3.
3 x Avid Juicy hydraulic disc brakes, 2 appear to work fine 1 needs some tlc ~~ -
images found here
https://www.flickr.com/photos/99782232@N00/albums/72157666554473430
-
as i got a very decent bargain on the above i am passing on some of the bits via freecycle and have added some of my own
1.Pair of well beaten Mavic EX729 rims bashed about and dinged but mechanically sound. These are great rims, Mavic's reference downhill rim 32H
2.Pinnacle Camino frame with Race Face Ride XC cranks attached. As can be seen from the photos previous owner has removed lowered the seattube to run a low saddle. Can't vouch for the work done but it looks mechanically sound. Pics show the work
3.Assorted tyres
Impac 27 x 1.25 good / new
Camel 26 x 2.1 average condition
Specialised FatBoy 26 x 1.25 slick tyre has been well used but has life left
2 x Impac Speed Power 3 26 x 1.75
Schwalbe Marathon Plus 26 x 1.75 skiided through blue layer under the tyre is showing , still usable and puncture proof
Eskar 2 Control 26 x 2.3 MTB
DMR Moto 26 x 2.2 tyre has been flattened off but still very usable
Michellin Dynmaic 700 x 23 good condition
Chen Shin MTB 26 x 1.95
Kenda MTB 26 x 2.1 Good condition3.
3 x Avid Juicy hydraulic disc brakes, 2 appear to work fine 1 needs some tlc
dicki
e47
PhilDAS-
Post a reply
About
A jump bike project/bits £50
Posted by
@horsee1
I have a 3/4 of a bike here that requires drivetrain and seat/seat post to become 4/4 (1 whole) of a bike.
It's a pile of bits that were in my way so I started making a bike out of them but didn't have everything and didn't want to spend any money on it as I didn't have need for such a bike in the first place.
Hope pro 2 hubs on mavic 729 rims.
Rockshox pike u-turn forks with wear to one of the stanchions.
Pinnacle aluminium jump/duel/street/whatever frame with hanger for gears. It's had the seat tube chopped by previous owner down to slam the seat, you can see this in the photos that follow.
E13 chain guide bits.
Avid juicy 3 brakes, pretty much new but came off a small hybrid bike so the hose is a bit short for the front, I've got a spare hose to go with the bike but have no inclination to swap them and bleed it myself.
It's a mess but a good start if you were thinking of making a little bike up to have a mess about on.