You are reading a single comment by @hippy and its replies.
Click here to read the full conversation.
-
OK, I have more room on this frame than I imagined.
I'll post pics in a bit.
Where did the cafe dropper come from (I've seen them in Oz, I use an Elite cage with lower holes normally)? I will need to space it out to clear band-on derailer.
I measured the Deuter I used in PBP and it's 5cm wide, so 4cm should be OK for me.
Anyone got UK custom framebag stitcher links? Do those Inui design guys deal with English speakers?
hippy
TM
atk
Took 1 week to get it made and 1h to cut the cardboard with the marks for the straps so he could use it as a guide. There must be at least a guy sewing custom made bags in the UK that can get them done in less than 2 weeks...
Don't know you legs measures, but mine pass about 2cm away from the tubes, and I'm not a skinny type (the one on the right) but neither a pistard/TT. While out of the saddle the fuelpod wasn't a problem either with rubbing legs, but we are talking framebags here.
I've used the Lezyne Flow Cage SL just because I wanted to use the SIS 1L Bidons and Mike Hall used that combination without problems in this winning Tour Divide (but with the expensive carbon version). I've done some curb jumps and fast descents with potholes with both bottles full and neither jumped out. Also its easy to really insert them sideways by squeezing them a bit.
The trick to make a framebag so long (frame size is 63cm) with will no bulge in the middle is to sew one or two velcros on the inside of each side, so when you link them the make a "bridge" between each framebag side, and also act as little walls to contain the cargo so it doesn't move around too if you take something out.
I'm sorry for the vertical video, but was the best option to show what we are talking about, apply cold beer to eyes afterwards.
https://www.youtube.com/watch?v=S-VnstDT4BQ
Just a stupid idea I had, to put a card inside with my personal & health data just in case someone finds me in a ditch... >_<. But @CarlosBI had a better one for his framebag: sewing some reflective stripes on the sides. We both used his cage dropper adapter on the vertical bidon cage to get more room for the framebag, still waiting for the screws to arrive from china to sell them in the online store.