You are reading a single comment by @user58252 and its replies.
Click here to read the full conversation.
-
Thank you.. to strip the paint I used a set of those \/ on a cordless drill, then sanding paper (120,320,400) with a lot of water.
an alternative would have been using a paint stripper/remover. But I found my method cheaper as I had everything I needed.to repaint i started with 2 coats of primer, then 2 coats of silver (which I believe is the standard colour used for alloy wheels), then a clear coat mixed with those flakes below, then another pure clear coat to secure the flakes.
user58252
Nice work Mario... out of interest what method did you use to strip the old paint? Also what sort/brand of paint did you use to reprint and how did yo apply it?