1. Home

Any question answered...

You are reading a single comment by @johnnyhotdog and its replies. Click here to read the full conversation.
  • •

    I know This is a single speed website but I need advice on the shimano ultegra 6800 11 speed I'm running on my cross bike. No matter how much adjusting has been done, limit screws, tension, there is still rubbing coming from the front mech when I'm in the hardest gear. The local mechanics have shown me that it's due to flex on the chain ring when under pressure and because the ultegra is set up so compact. Is there anything I can do or am I stuck with a new noisy cross bike?

  • •

    I have older 10spd Ultegra and when I shift up into the big ring, I get some rubbing but there's a half click back on the lever that moves the derailleur out of the way a little bit without shifting down.

    Have you tried this?

  • •

    Yeh, I had been told about this but it didn't really do much.
    I think I'm just going to have to wheel it along to the local (different) bike shop. If I look at it again, or hear that rubbing again, it's going under a bus, I may or may not be on it.

About

Avatar for johnnyhotdog @johnnyhotdog started

About Terms of Use Privacy Policy Cookie Policy Report a problem