Power Meters / Powermeters (SRM, Powertap, Quarq, Ergomo, Vector, Stages, power2max, P2M, 4iii, InPower, Cinch)

You are reading a single comment by @Howard and its replies. Click here to read the full conversation.

•

hippy in reply to @Howard

There's two BB options 68mm standard BB30 and 68mm PressFit BB30:

http://www.cannondaleexperts.com/Cannondale-SL2-68X109mm-Ceramic-Bottom-Bracket_p_2095.html

http://www.cannondaleexperts.com/Cannondale-SL2-68X109mm-PressFit-Ceramic-Bottom-Bracket_p_2094.html

I've currently got adapters in the Shiv to take the BB30 BB down to Shimano 24mm axle size. Which BB type will I need to fit the Si or SiSL2 cranks? The PressFit one or the standard one?

•

Howard in reply to @hippy

Shiv is BB30 non? So the standard kit.

If you have installed an adapter for a screw in thread BB then you'll have to remove that.

•

hippy in reply to @Howard

OSBB which is basically BB30 but the Cannondale Expert site offers BB30 and PressFit BB30 - basically, what's the difference between those two? Obviously the adapter will go.

About

Avatar for Howard @Howard started