You are reading a single comment by @dubtap and its replies.
Click here to read the full conversation.
-
Thanks!
"We're going to hammer... which is never a good idea..."
Ok, that's the step I figured on but didn't want to do in case I was wrong.
I pulled mine down (what I could) last night and greased some bits and it's a lot quieter but still loads of play in the bearings. Rims are on the way out too so I think I'm just going run it until destruction, pull it down, sending hub to Paligap.
On the other hand, I could try that method and still send the hub to Paligap when the rims wear out. Hmm..
hippy
@dubtap
https://www.youtube.com/watch?v=fS_BL1b2wns