You are reading a single comment by @edscoble and its replies. Click here to read the full conversation.
  • Fairly sure it's the headset - it's when climbing/pulling on bars that I hear it. There's a tiny tiny bit of play if I have the front brake on and move the bike back and forth.

    Headset was assembled by a mech that I trust, then when the steerer was chopped, re-assembled by another mech. Both guys know their stuff. Second guy did say to come back if there were any issues so will probably just pop in and ask him to have a look.

  • Quite likely the headset is settling in and got loose after a short while.

    Loosen bolt on stem, tighten top cap a bit, then torqued stem bolt back to 5Nm.

About

Avatar for edscoble @edscoble started