You are reading a single comment by @Scilly.Suffolk and its replies.
Click here to read the full conversation.
-
The tricky bit is these...
Right link? It's the same link as the first one, which is for the risers.
Scilly.Suffolk-
https://store.3tcycling.com/en/spare-parts/aerobars/aerobar-conversion-plates-kit-168.html
Seem to be out of stock everywhere...
umop3pisdn
You need to email Fibrelyte requesting however many spacers made from Tester's drawings.
Bolts need to be whatever stack is + original bolt length, can't rememebr off the top of my head but it's might be 30mm.
The tricky bit is these which you need 4x (2x set) to fill in the recesses in the base bar to allow you to use the spacers.