Current Projects chat and miscellany

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

LeMesjeu

In need of an expander plug that will fit a 22mm inside diameter carbon steerer tube of a 1" Mizuno fork. Also really daunting task to find a 1 1/8" spacer with a small (+-32mm) outside diameter.

Anybody have any tips?

•

gbj_tester in reply to @LeMesjeu

In need of an expander plug that will fit a 22mm inside diameter carbon steerer tube of a 1" Mizuno fork

Are you sure it's that big? That would be pretty thin walled for a carbon steerer. I've got a couple of 1" expanders in my parts bin, but as they are designed for typical aluminium or carbon steerers, neither looks likely to stretch to 22mm

•

LeMesjeu in reply to @gbj_tester

Fffu, you're right! Steerer ID is 18,7mm.
Wouldn't happen to have an expander around that size.

Concerning the spacers, going to have a few 3D printed out.
Will see how that goes and maybe order some if not content.

About

Avatar for gbj_tester @gbj_tester started