You are reading a single comment by @edscoble and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
edscoble
Pete4Eyes
Ok, I'm having trouble. I took the front spyre brake off, cleaned it up and took the pads out to check for unusual wear. All good. Put it back on. Went out and broke hard on the front. As I come to a stop I can clearly hear the pad catching the rotor arms that come from the centre to the outer brake track. Alignment is good and everything is stock so shouldn't be any compatability issues. Any ideas? Please =[
(I took the brake off and cleaned and reset it in an attempt to remove the noise. This wasn't a result of the maintenance)