-
Check ERD on CPX33 (should be on rim, and no it's not the same for all models you will have to check...can't do it for you :)
Google ERD (within a mm +/- should be fine, but check how much spoke thread there is/how high spokes are under tape before you buy...if they're nearly poking out better to take a mm off. Perhaps you can even take 2mm off)
Success result profit.
You can also play with spoke pattern here if you fancy something quite different:
https://leonard.io/edd/ -
Dt swiss r460 (db) ! (which seems to be the answer to everything this week...)
http://www.bike24.com/1.php?content=8;product=155362;menu=1000,4,301;mid[69]=1;orderby=2
http://www.bike24.com/1.php?content=8;product=123285;menu=1000,4,301;mid[69]=1;orderby=2From leonard spoke length calculator:
Mavic CXP33 (ERD is Mavic's Nipple Seat Dia 595mm+ 3mm for nipples) =
598 mmERD of dt swiss r460 = 596mm ....so around there (or build with nipple washers)
You are reading a single comment by @Howard and its replies.
Click here to read the full conversation.
JWestland
svenhöek
@Howard
Sorry, I'm being real lazy:
Is there a modern rim (disc or machined) that has a similar ERD as a CXP33, to the point where I could do a straight swap? Assuming the spokes on the original build were sensible, which I expect they were given that the originals are Arup builds.