-
Zinser 123 is a good primer. I usually use an undercoat on top of that from the manufacturer of the paint. Zinser is very grabby which is why it's a good primer for any surface, but when you are painting on top of it it can dry the paint too quickly so when you touch over the paint to blend it the freshly applied paint becomes stringy and doesn't dry to an even eggshell. It's hard to see from your photo what's going on exactly but it could be that.
Certainly when you're painting flat surfaces you have to work very quickly and avoid going back over your work, difficult on shaker door panels like you have there.
I've seen kitchen painting projects in water based paints abandoned because of the issues. There is a great new paint base called porcelin which a Fulham decorators suppliers helped develop. It dries very slowly so that the surface can form like an oil based eggshell and it's very hard when dry so it doesn't wear like water based on shelves etc. Only downside is the re-coating time is 8-12 hours, and it costs £35 a litre or something like that.
You are reading a single comment by @Airhead and its replies.
Click here to read the full conversation.
Airhead
Big thanks @Airhead, this is what housemate came back with:
Two coats of Zinser 123 bullseye primer. Applied with a brush. We did exactly the same on the test doors and they were fine. Current guess is maybe when we wrapped the brush with clingfilm between coats. Perhaps clingfilm has some coating that is reacting with the paint??