You are reading a single comment by @Ste_S and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
freezing77
@Ste_S
Braze on Shimano Tiagra front mech, Tiagra double chainset. 10 speed.
While in the 50 ring and 12 sprocket, I can't seem to adjust the front mech so that the chain isn't either rubbing on the mech outer plate, or the teeth on the 50 chain ring aren't rubbing on the mech inner plate.
Pretty sure the height of the mech is fine - a 2p gap in-between the mech outer plate and the teeth of the chainring.
Not ruling out that I've done something stupid with the front mech, but is there anything else that could be affecting this ?