You are reading a single comment by @tgotb and its replies.
Click here to read the full conversation.
-
Perfect!
Two years between posts is a long time, but it was worth the wait :)
-
This ^^ is what I'm going to try, thanks.
failing that might get a bit more involved with the hammer, to be honest it was a bit of a token effort first time round, just feels a bit dodgy whacking carbon stuff.
Out of interest how does coke measure up against plus gas? (what I used before)
Scilly.Suffolk
at313
@tgotb
Insert M6 bolt from the front. Now turn the whole thing over, placing on a hard surface (eg workbench) so that the M6 bolt is resting on the workbench.
Now tap in a Torx wrench bit (gently). Because you have the M6 bolt on the other side, this won't drive the bolt any further into the fork.
Once the Torx bit is in place, unscrew gently whilst pushing the fork gently downwards, so that your M6 bolt helps push the nut out.