You are reading a single comment by @horsee1 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@horsee1
I have a 3/4 of a bike here that requires drivetrain and seat/seat post to become 4/4 (1 whole) of a bike.
It's a pile of bits that were in my way so I started making a bike out of them but didn't have everything and didn't want to spend any money on it as I didn't have need for such a bike in the first place.
Hope pro 2 hubs on mavic 729 rims.
Rockshox pike u-turn forks with wear to one of the stanchions.
Pinnacle aluminium jump/duel/street/whatever frame with hanger for gears. It's had the seat tube chopped by previous owner down to slam the seat, you can see this in the photos that follow.
E13 chain guide bits.
Avid juicy 3 brakes, pretty much new but came off a small hybrid bike so the hose is a bit short for the front, I've got a spare hose to go with the bike but have no inclination to swap them and bleed it myself.
It's a mess but a good start if you were thinking of making a little bike up to have a mess about on.