You are reading a single comment by @hippy and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
hippy
hamrack
'+' facing forward. The top cap has an offset bolt hole, so you'll want the extra space (indicated by the +) at the front and the reduced space at the back.
If you look at your picture you can see by the shim at the bottom it's tipped back (to increase rise) and has the - at the front.
Edit: taken from the tech docs
" NOTE: Use an offset top cap, with the top cap hole located to match the position of the shim, so that the top cap hole is in line with the steerer tube plug
threads. "
I guess if you sight through the top cap and check the hole lines up with the thread then you should be ok.