You are reading a single comment by @M_V and its replies.
Click here to read the full conversation.
-
Marmoset was 3/8" 24tpi
I did replace a Homer and a Vandal bolt at some stages in my life but I can't remember the pitches. You should be able to just take the wheel into a hardware store and try out bolts, I remember that was one of the USPs on the adverts for the Homer and Vandal hubs, that rather than having to replace a costly axle you could use any bolts from the hardware store.
-
I think it'll be UNF but hoping someone like mdcc_tester with an encyclopedic knowledge of such things can confirm for me
The rest of the world has been using ISO metric fasteners for decades, so I don't have an encyclopaedic knowledge of 'merkin threads which should have been consigned to history before I was even born :-)
NurseHolliday
gbj_tester
@M_V
Anyone know what size of bolt I need for a G Sport Homer/Vandal hub?
I
knowthink it's 9/16" in diameter but I don't know the thread pitch.I know it's finer than 1.5 but coarser than 1.25 or vice versa. I think it'll be UNF but hoping someone like @mdcc_tester with an encyclopedic knowledge of such things can confirm for me.
Bolt head is between 20 and 21mm if that helps.