You are reading a single comment by @hugo7 and its replies.
Click here to read the full conversation.
-
I'd probably go with mini Vs rather than drilling the stem if I were you.
If you can't have a fork mounted hanger then I would definitely go mini Vs.
If you're set on cantis then I'd drill the fork crown and use a fork mounted hanger.
Basically drilling the stem would be the last option I'd choose because of the judder.
(also that cable routing looks awfully contorted)
hugo7
BasJansen
Next step: sanding off the last paint, sanding the larger parts of the frame with fine grain paper.
As for the parts, I'm planning to do this for the front brake cable:
Anyone any experience with a setup like this?