You are reading a single comment by @pdlouche and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@pdlouche
First time I've looked at the Kuota since the summer. Tried a 10spd cassette on the Juna Ozzo trispoke, and it fits fine, it was a little tight to get the lockring on, but it locked down with enough turns, and enough space for the axle to clear the cassette on the bike. Maybe spacing it a little won't cause any dishing problems, but might give a little extra safe clearance, tolerances are tight at the mo. Maybe I'm just nervous after seeing oodles of space from the 7spd cassette on a 9/10spd freehub.
Big question, not sure how to phrase it or I'd use the forum search:
I thought the trispoke was out of true, because there's a bit of a wobble. Noticed as I spin the wheel on the bike that when I let it freewheel, the cassette (static) also follows the wobble, does that make sense? It's like the axle is a little bent? As if the whole wheel moves across a little from the hub.
Could there be something bent in the hub? Or is it loose parts? The wobble is consistent, always a dip in one direction at the same point of rotation (like a wheel out of true).