No-Fork project, bicycle geometry hacked

You are reading a single comment by @No_Fork and its replies. Click here to read the full conversation.

•

gbj_tester in reply to @Tijmen

You might want to add a bushing to angle your axle a bit.

It's not immediately obvious, but the axle is fixed at 3 degrees. Yes, I'm that much of a tart that I actually bothered to camber it even on a gag pic :-)

•

No_Fork in reply to @gbj_tester

I actually bothered to camber it even on a gag pic :-)

This
is
amazing

Jaw dropped : ))

Only thing missing now is lateral adjustment, or are you planning to do it with the spokes?

•

gbj_tester in reply to @No_Fork

or are you planning to do it with the spokes?

Yes, it's easy enough to dial in the offset by adjusting the dish on the wheel build.

About

Avatar for No_Fork @No_Fork started