The Blaze Burner Group Buy @£25 each (£50 Retail)

1. knyazb
   
2. vinylpimp
   
3. vinylpimp
   
4. leanon_me
   
5. Domo32
   
6. motoko
   
7. motoko
   
8. Heitzman
   
9. Heitzman
   
10. jupiz
    
11. dron
    
12. vinylpimp
    
13. vinylpimp
    
14. vinylpimp
    
15. vinylpimp
    
16. leanon_me
    
17. Giggsywiggsy
    
18. -=Mike=-
    
19. -=Mike=-
    
20. stars7
    -------------------------------------------
    
21. MRI
    
22. h-j
    
    

I have an official response from Blaze and I will carry on taking names 21st onward, but you would have to pay full price £25 as I cannot make an order over £500 paying more than 60% of the costs.

Hi Hon,

Thanks for getting in touch, and how super organised of you to coordinate efforts :)
Of course it's no problem - if there's more than 20 of you, we'd be happy to honour the price of £25 for everyone else. All you need to do is manually increase the pledge level by £25 increments (you can change your pledge level all the way up to when the campaign closes on 18 December when it will lock).

Burners can be in any combination of black or silver casing, white or red LEDs, not a problem (we're also taking backer votes on a third casing colour option). I see there were a few questions on the thread too which I'll answer quickly here, but you'll also be able to see a lot more info on the backer-only updates when you make a pledge.

Attachment options - our backers were most interested in other ways to attach the Burner.  So now the Burner will ship with a seat post mount as seen in the vid, AND a free second bracket option because we met our £100k stretch goal.  There is a strong bag clip for attaching the Burner to a bag, jersey pocket or belt loop (you guys saw the prototype on our Instagram).  There's also a bracket that can attach to smaller diameter tubes e.g. seat stays, rear carriers etc.   If people would like multiple brackets for multiple bikes, more than what we will send to everyone as standard, then they're just £7.50 extra.
Angling - the angle of the Burner bracket can be adjusted to compensate for seat tube angle.  The rubber insert that you would use to protect your frame is bulbous and the inside of the mount is spherical, so it can account for this angle.
Orientation - in the vid, the Burner is always horizontally mounted, but it is able to attach horizontally or vertically.
Settings - 100lm is the brightest output the light can give.  We'll keep this mode for the people who need it, but since the Burner's programming is yet to be finalised we'll be adding different modes based upon what our early adopters want and need.

I will check about engraving and how we could offer this, but for such a big order I'm sure there's something we can do.

Please let me know if you have any further questions, thoughts etc!

All the best,
Rachel.