You are reading a single comment by @JWestland and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
JWestland
gbj_tester
So some intoxicated ebaying has meant I've now got 2 pairs of dura-ace 7600 hubs (one rear in 110mm and the other 120mm) on the way from Japan. Last night I ordered some ball bearings and grease as I'll be giving them a service which is a first for me. A couple of packs of 1/4 inch and 3/16inch bearings and 125ml of shimano grease.
From the look of things it is fairly straightforward but if there is anything I should keep an eye on please let me know!
The plan is to build one pair up on mavic open pro's to put on an old Mercian Vincitore I've got which has a rear spacing of 110mm. Depending on time (and if Santa brings me a wheel truing stand) then I will try and build them myself so will be back here with a long list of questions ....