You are reading a single comment by @edscoble and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
edscoble
Got a quick query on geometry.
About to buy a Ribble Winter Audax. I've measured myself up and also taken notice of the geometry and set-up of my Canyon.
In the below chart, I have the 'S', which I have no spacers on and have gone from a 90mm to 100mm stem.
Going by Ribble's measurement guide: inseam (77cm) x 0.69 = 53.13 - I should round down to the 52. The top tube of this size is 1cm longer, so I'm planning to spec a 90mm stem. The head-tube is much smaller on the Ribble, but they seem to come with quite a big spacer stack.
My reason for posting is whether anyone thinks I've missed something obvious and to see if there are any Ribble owners who have any sizing advice.