You are reading a single comment by @scultura and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@scultura
On my Argon 18 Krypton the lower fork bearing doesn't sit flush on the crown race. The bearing is 1 1/4 inch with a 45 degree internal chamfer. The crown race doesn't have a matching chamfer and the bearing 'floats' about 3mm from the top of the fork. I have a different crown race on the way but wanted to get some other opinions first.
Current crown race is also very difficult to remove even with a correct tool. Could it be glued?
1 Attachment