You are reading a single comment by @root and its replies.
Click here to read the full conversation.
-
I lack the artistic ability to draw this though, so I'll settle for an un-engraved one.
I always assume everybody on here is either a bike messenger or a graphic designer, so somebody must be able to draw it for you if you're the former :-)
Have you any spare torx screws and if so are the countersink angle and depth similar to the previous design?
Yes, I have spare screws, they fit all versions of the caps but they have a slightly shorter head height than the aluminium screws issued with the first batch, so the screw is only properly flush with the top of the cap if you have one of the latest caps.
gbj_tester
@root
Can I have a type 2 please?
Ideally I'd like the letters CDF separated at positions 9 12 and 3 respectively, with ^ being taken by the the croix de fer stylised 'X' at 6. Perhaps even 4 middle dots equally spaced between the characters. I lack the artistic ability to draw this though, so I'll settle for an un-engraved one.
Have you any spare torx screws and if so are the countersink angle and depth similar to the previous design?