SSCX Only!

Is it just held in place by the QR?

Looking for the best way to convert my all city nature boy to 1 x 9/10

Yes, It have the position fixing (in Picture) at the inner side. and i use QR for held in place too.

2 Attachments

This is what I use.
But @ChuchartKJND. is better if you need to change the tires.

1 Attachment

just sent you a pm

@ChuchartKJND. Do you have any more of those?

I make it only one for i use.If you need one i can make it for you but the cost for transport from Thailand to your home will morethen the cost for the this adeptor.

I bet there would be a few people in London keen.

We could do an order you send them to my address and I'm happy for people to collect them from me

For the cost of the adapter is 25 pounds but the cost fo transport by DHL is 20 pounds.

Got Charge Plug 1.

Turn out the wheel does have cartridge bearing and not loose ball as Charge claim, so that's a nice surprise.

The brakes were upgraded from original spec which is a lots better.

Only problem is the 42/16 is way too high (a little over 72GI) due to the large tyres, and of course the annoying rear cable routing which can be remedy by putting another housing inbetween the cable stop.

Don't have a scale but probably around 10kg due to the wheels.

Don't have a scale but probably around 10kg due to the wheels.

And the forks, and frame, that chain and the um parts and that.

#bikesnob

Do you know the frame angles?

42/16 is way too high

Perfect for dry gravel grind

Surely it can't be the same weight as stock pompino?

Whats the ST angle on that?

71?

I think it's 73.5 (with pomp fork)

1. thats not pomp fork but something higher
   
2. pomp never was 73.5 even though the v3 chart said so. More like 72
   
   

(pompetamine geometry chart)

1. Salsa Vaya fork
   
2. I think it's the V2 (it was black and gold before) if there is a difference.
   

9.8kg with stock pedals (all metal wellgo).

The wheel, and the 38mm tyres seemed to take up the majority of the weight (the Kenda is definitely above 600g each).

Will reweight it once I fit my other wheels and CX tyres on it.

I would be keen on this if there's a group buy happening

Looking forward to reading your experience with it. I have re built the surly as a singlespeed for the time being.

rep I think, anyways idk because it was for a long time my wallpaper

Recommendations of a good not too expensive wheelset I can put on my mash cx? Just need something to get me through the winters commute, but can also swap tyres and do a bit of off roading on???