You are reading a single comment by @Prole. and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Prole.
Fox
This is from about a week and a half ago. In this picture it has most of the cement board lining (which has rigid insulation bricks behind) and the slot drain installed. There are also little pipes coming in at the bottom for filling it (these will be hidden underneath the bench, it will fill from the bottom) and what you can't see is that underneath the base in the screed is an electric heated floor mat which will be controlled by a thermostat on the wall just outside the bathroom.
As you can see at this point it still needed one piece of cement board putting in. The white plastic circle sticking out on that side of the bath is the control for the drain so we can empty it. They only come in silver and we hate all silver shiny bathroom things so we're planning to get it powder coated, probably black and probably at Armourtex as it's literally round the corner!
So once all of the cement board is in (I actually don't know if it is right now, the whole bath is temporarily covered up with big pieces of insulation so I couldn't actually show it to @tommmmmmm on Monday night) it just needs the micro cement (think a very thin layer of something that will look like polished concrete) layer applying. Colour will probably be Pizarra on this page:
http://www.en.kcberry.co.uk/colours/attachment/carta-cores/