SOLD // Trek T1 aluminium track frame - Size M (54.1cm ST / 54.3cm TT) // New Full Carbon Forks // Aero Seatpost // Carbon Bullhorn Bars // SOLD

Hi all,

The frame alone has sold, all the other parts are still available.

~~The bike cull is continuing and and I am gathering funds for a titanium road bike.

This time I have a spare '56cm' 2009 Trek T1 aluminium frameset with some tasty bits.
I think Trek uses the 56cm loosely as it is more like a 54cm.

The frame was USA made with Trek ZR 9000 Alloy

It was used as a daily ride so the paintwork has seen better days. Loads of paint chips and the only (slightly) noticeable 'dent' is on the NDS on the 'K' of TREK.
Krypo NY lock vs oversize alloy tubing while locking up....
I was going to get it powdercoated in the summer but that didn't happen.
It would look good simply stripped.

Frame size M (56cm stamped on the BB and geo chart below), however no frame measurement come close to 56cm.
The seat tube is 54.1cm from centre of the BB to seat clamp and about 51cm ctc.
The frame has an effective top tube of 54.3cm ctc.
Comes with a good used integrated headset 45°x36° and an allen seat clamp.
SOLD FOR £150~~

Forks are brand new 1 1/8th black UD straight carbon forks with 30mm rake (drilled). Hard to get a set of drilled forks with such low rake.
Split Price = £75

The bars are Profile Design Aero Carbon CBX TT Bars 42cm (will come with the clip-on extensions). Pro-Lite 80mm OS Pedrosa Stem. Fi:zik microtex black tape. TRP Aero carbon brake lever with Jagwire black cable.
Split Price = £70

Carbon aero seatpost, I believe the brand is "Regal"and I purchased it new 'on here' and fitted it to the bike. Saddle is an ISM Adamo Prologue.
Split price = £60

I am after £295 for the lot described above.

Pick up from Stoke Newington.

Thanks for the interest.

Vince

Photos below:

Pm

.

Can you grow it by a few cm please...? :)

whats the steerer length?

Layback seatpost + 140mm stem and you're good to go!

@dsxro
The forks are monocoque full carbon fiber, UD Glossy Finish.
Drilled for brakes, steerer:1-1/8'', lengh:300mm uncut
Axle To Crown:367mm
Crown:46mm
Offset:30mm

Happy to cut the fork steerer to the right length or to a length you require.
And chuck in a carbon specific fork bung.

can you message me some pics of the forks closer up?

Photos now PM'd.

Split prices update =

Frame + integrated headset + seat clamp = £150

Brand new 1 1/8th black UD straight carbon forks = £75

Profile Design Aero Carbon CBX TT Bars + clip-on extensions + 80mm OS Stem + TRP Aero carbon brake lever = £70

Carbon aero seatpost + Saddle = £60

The frame alone has now been sold

I will create another thread for the forks/cockpit/asspit.

Thanks for the international interest!