-
Ok, so I bought the hangar - but the 10 spd cassette jams against the hangar's bolt - assume that's what you were getting at when you told me to run it as an 8 speed? i.e. an 8 speed has enough clearance for that bolt?
So to add complication - the wheel has a campag freehub. I've never done it, but there's no issues swopping a shimano freehub in there, is there?
bashthebox-
the wheel has a campag freehub. I've never done it, but there's no issues swopping a shimano freehub in there, is there?
Which wheel? Some are an easy (albeit often expensive) swap, some are never going to happen.
-
Shorten the bolt using a file, grinder whatever you have. Or get a shorter bolt, it only needs to be long enough to go through the frame any more than that is not doing anything useful.
-
Freehubs body are usually expensive to the point that it actually be better value buying a new Shimano budget rear wheel (which are very decent).
Unless you can find one suitable for your wheel for about £30.
gbj_tester
freezing77
edscoble
You need this;
TBH it's easier to get this and run an 8 speed system, cheaper in the long run than a 10 speed system (and last longer).