You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.
  • I hear this for the first time, any more info on that? I always thought the slot on the seattube should align with the slot on the clamp.

  • any more info on that?

    A perfect band clamp has uniform radial pressure. As band clamps are imperfect, they tend to produce peak radial pressure at the screw termini, adjacent to the slot. To resist this, you should put the slot in the band clamp on an uninterrupted section of the tube, as this will resist deformation under the abnormal load better than the unsupported edges of the tube slot.

  • I'm sure I read on here the slots were meant to be aligned to limit interaction between the clamp and the tube surface...

About

Avatar for gbj_tester @gbj_tester started