You are reading a single comment by @thecycleclinic and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
gbj_tester
@thecycleclinic
The new pacenti sl23 has a 20.2mm internal width so is just right for big tyres. The archetype will be fine but it is narrower. The quill looks good but as it not available in the u.k yet it is rather moot. Besides velocity rims are a bit of a mixed bag. Of all the rim brands the one with the most rejects from me has been velocity. Some of the ailerons this year have just not been round and have big bumps or worse a bump that shows on the side.
As for back low cost hubs in 20f 24f drilling look no further than miche primato.Very reliable 435g for the pair and they come with 11 speed bodies. The problem is you won't find them from the usual sources as in these drillings they are available from miche only oem at least that how I get them for wheel building. Chickens cycles only sells same drilling pairs but has 24f 24r pairs in a few weeks as they are out again.