-
• #2
I have a NOS Dura Ace 7800/DT Swiss R1.1 wheelset with new 12-27 10 speed cassette.
32 spoke/3 cross. These are the hubs with the slightly odd freehub that have taller splines so take only the matching Shimano cassettes unless you lathe off the excess. A few bike shops can do this for not much apparently.
They've sat in my spare room for a while now as I had some other wheels built for the bike they were intended for.
No tyres or QR skewers.
I'd accept £180 collected or £192 couriered, the rims alone were over a ton.
After quite a few bits to build up a new frame.
Shimano 10spd 175mm cranks 105 or higher
shimano 10spd rear mech silver preferred.
shimano 2x10 front mech silver preferred.
10spd cassette and chain
some nice wide drop bars 26.0mm clamp
and some light and strong road wheels to compliment the above, hope hubs or similar.