On One Pompino owners...

Posted on
Page
of 353
  • ok, Sugino SG75 with Campagnolo Centaur BB 115,5mm... it works!


    1 Attachment

    • pompino 1.jpg
  • .


    1 Attachment

    • pompino 2ajpg.jpg
  • I like^
    How wide are these mudguards? I need to get my Pomp ready for winter, not sure 50mm will fit...

  • In theory would it be possible to run 650 wheels with larger tyres on a pomp without too much negative effect for a winter hack about? Or is this crazy talk?

  • crazy talk?

    ↑This

    As discussed previously, Pomps have maximum width clearance for the tyres in the right place for 700C, they actually have less clearance at the smaller radius of 650B tyres.

  • Also hard/impossible to find brakes unless you put new braze on mounts.

  • 45mm sks longboard

  • thanks

  • What's the widest size tyres people are running on their pomp (v4) with mudguards?

    I like the idea of RibMo's or Pasela's, thinking 32c is the widest I can sensibly go for but I'd like 35c if it's possible.

  • I ran 35c Pasela's on my V3 pomp with guards but there was very little clearance between guard and tyre.

  • Those dangly bits look dangerous!

  • I'm selling my size L Pompino frame + All-City fork + CK headset in classifieds #spam

  • Does anybody have a set of black levers for use with Mini-Vs that they might like to send my way? RL520s or something.

  • my pomp is so close.

  • Get a 66 ratio on it and we can do RP together for realzzz! ;)


  • updated pomp with Bluemels

  • Get an 80gi ratio on yours and we can do it for really realz ;)

  • Pretty much got everything together for build now having picked up f&f and interim wheels from @andyp (cheers).

    Is it possible to have 32c + mudguards + front rack (soma porteur kinda thing)?

  • may need to drill forks for rack tho, most pomps dont come with the front drilled, only the rear of the steerer for mudguards etc

  • My 3rd pompino. Took parts from my cinelli, and other than new fork i think this will do.

  • Pomp is very nearly ready to be built... parts I have:

    • Pompino V4 Raw (small..)
    • FSA Orbit headset
    • Tektro CR720 cantis
    • Thomson seatpost
    • chain & saddle from the current bike
    • 2x cockpits to decide between (compact drops with cane creek SCR5 drop levers/easton monkeylite risers with crosstop levers) - I assume both of these will work with the cantilever brakes? Or am I going to have issues with the riser set up?
    • Black HplusSon TB14s on Dura Ace 7710 hubs - 32c tyres will be fine on these rims right?

    So still to get is just

    • a crankset - any suggestions? (for a smallish budget ha..)
    • tyres - thinking Panaracer Pasela gumwalls, 32c, where's the best place to get these from atm?


    And still need to decide on gearing... think I am going to have to go single speed for a while in order to give my knees a bit of a break. Have a 17t freewheel cog on the rear atm.

    Getting excited and impatient!

  • a crankset - any suggestions? (for a smallish budget

    FC-S501

  • There's better tyres out there - except if you're totally desperate about having skidproof fashionwalls.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

On One Pompino owners...

Posted by Avatar for deleted @deleted

Actions