You are reading a single comment by @pifko and its replies.
Click here to read the full conversation.
-
I use a track chainring on the outside of a set of 6700 cranks. Might be easier for you to do the same as you can then place a small spacer behind cog to improve the chain line.
pifko-
I use a track chainring on the outside of a set of 6700 cranks
I use a track chainring on the outside of a set of 5700 cranks
The mid point between rings on Shimano road cranks is about 43.5mm, so the outer position gives a chainline of about 47mm and the inner position gives about 40mm. @Sumo must decide which is closer to whatever chainline his hub provides.
gbj_tester
Anything wrong with using some Tiagra 4600 cranks in 165mm with a track chainring on the inside of the spider for my track bike?