You are reading a single comment by @andyp and its replies.
Click here to read the full conversation.
andyp-
DT Swiss 340 so I think it's M10
Certainly isn't, DT hubs have fat axles and cartridge bearings. You can convert to 135×10 through axle and then use an M10 axle & track nuts instead of the DT 10mm RWS, or you could get your machinist to copy the 135×10 through axle but with a narrower bore and M10 tapped ends for bolts.
Not sure if this kit fits 340 but based on other axle compatibility I think it should.
gbj_tester
Which hub? If it's something with a conventional M10 thread, Velosolo have axles in 170mm or 180mm overall length, you'll probably want the longer one to fit track nuts onto 135mm dropouts.