You are reading a single comment by @umop3pisdn and its replies.
Click here to read the full conversation.
-
That looks pretty perfect. What are the current rims? A set of Reflexes with some proper gumwall tubs would look so good.
You're going to upset quite a few weekend warriors at Swinley.
umop3pisdn-
@Hulsroy @umop3pisdn thanks guys :)
Current wheelset is phil LF track hubs to tb14 rims, most likely going with a set of these next.
My plan is to upset all the MAMTBers, might even bring down my garmin to try rinse the KOMs on some climbs ;) I definitely wanna do some little jumps on this too, gotta prove my work.
IR
Built a frame for myself earlier this year, obviously it's custom but the geo is pretty much 59X59, 72 degree HT and ST with 72.5mm BB drop for dat slammed racey feel and a 185mm HT so I can be comfy in the drops all the time. Set up with 110mm 0 degree stem and 805mm saddle height for CX steez.
It has clearance for 29x2.2 tyres front and rear at a pinch, internal rear brake cable routing (with guides) 2 sets of bottle bosses.
Columbus spirit rounded rectangular TT for easy shouldering, max DT and ST, Zona fork and Zona CX specific stays with custom bends/dents, 68mm road BB and 130mm rear spacing.
The horrible paint is only temporary as I'm planning on taking it on a wet trip to swinley this weekend and didn't want the raw frame to rust, I'm thinking of getting a relatively dark purple with gold flakes done when I can.
Lever/bar angle still to be dialed in, I also want to rebuild the hubs (phil LF track) to some wider chinese crabon rims and get some paul mini moto brakes with CK HS and BB.
Rides fantastically and weighs 9.1KG as is, frame is 1750gms.
39/19 with 172.5mm cranks.