You are reading a single comment by @Tijs and its replies.
Click here to read the full conversation.
-
Unscrew the clamp bolt so it comes out of the far side of the clamp entirely, then put a coin in the opening between the clamp and screw the bolt back so it touches the coin in between the clamp. Now when you tighten the bolt, it pushes against the coin and opens the clamp further. Don't push it too much though. You can also use some soap/grease on the bars to make them a little slippier. That's how I did it with my compact bars and quill.
Tijs
How did you get the bars through the stem? I have the same bars but cant seem to get them through any quill stems like your one..